Restore Your Own - 150 New EZ PEEL & STICK Brown Felt Pads In Small, Medium and Large For 75 8-Track Tapes That Have Metal Spring Pads. NO MORE CUTTING!!! YAY!!! These have already been cut to the exact dimensions of the three standard sizes of spring pads in all 8-track tapes.
DIRECTIONS: Remove the old dried glue off the spring pad (if any). Then apply the EZ Peel & Stick Felt Pad by peeling off the paper behind the felt pad. Then with your tweezers grab a side of the felt pad as close to the edge as possible (try not to grab the adhesive below the felt edge) then line up the felt corners (on the opposite side of where you are holding the felt pad with the tweezers) to the two corners with the metal spring. Then press it down on the metal spring once the two corners of the felt pad and the two corners of the metal spring are all aligned. The adhesive on the peel & stick is very sticky, so you may want to put down your cell phone while you do it. lol
